NNX-D1185 Personalized Customization Bright black 19*8.5 Inch 5*112 120 Forged Car Wheels Rims

NNX-D1185 19X8  ET 37 P.C.D 5X112 center hole 57.1 1piece forged wheel (custom 16-24inch any date)

Manufacturing method

Fake
Forging can be completed through one or more steps of various magnesium alloys. The most common is AZ80 and ZK60 (MA14 in Russia). The wheels manufactured by this method usually have higher toughness and ductility than the aluminum wheels, although the cost is much higher. Forging is a complicated process, including a combination of heating, rolling, applied high pressure, hammer and/or these processes. As a result, the molecular structure of the alloy changes, and as a result, the material becomes stronger and lighter.

put it together
There are two types and three types of forging wheels. Each part was a alloy rough at the beginning. If it is an overall forging wheel, it will be further transformed into a wheel. If it is a multi -wheel, it will be further transformed into wheel parts.

High -pressure die -casting
This process uses molds arranged in large -closed co -power machines to clamp the closed mold. The melting magnesium is poured into a filling tube called a spray sleeve. Pistons high -speed high -pressure push the metal into the mold, magnesium solidification, the mold is opened, and the sand wheel is loose. The wheels produced by this method can reduce prices and improve corrosion resistance, but due to the properties of high -pressure die castings, their ductility and intensity are low.

Low -voltage die -casting
This process usually uses a steel mold, which is placed on a molten magnesium. The most common thing is to seal the 封 on the mold and use the compressed air/cover gas mixture to press the melting metal along the straw -shaped pipe into the mold.

When processing with the best practice method, the ductility of the low pressure cast wheel can be improved compared with the magnesium wheel and any aluminum wheel, and their ductility is lower than the forging magnesium.

Gravity casting
Gravity casting magnesium wheels have been produced since the early 1920s. It has good ductility and its related performance is better than aluminum castings. The mold cost of gravity casting wheels is the cheapest of all processes. This makes small batch production, design flexibility and short development time.

• Min.Order Quantity: 4 Piece/Pieces
• Supply Ability: 100000 Piece/Pieces per Month