NNX-S58 Wholesales 19 20 21 22 23 Inch 5×112/120/114.3 Car Wheels Customized Aluminum Forged Alloy Car Rims

One piece, as the name suggests, the entire wheel is a whole.

There are two main processes in one piece of forging wheels:

1. For molding (also known as mold forging), the wheel shape after forging has basically been formed. It can greatly save product processing time. The disadvantage is that the early mold investment is high. The famous BBS forging wheels are used to use this process.

2. Milling forging, that is, to buy ready -made forging wheel rough and then train the wheel shape through the CNC (CNC processing center).
Two -piece forging wheels: 2 components, consisting of wheels and wheels.

Three -piece forged wheels: 3 components, and the wheels of the three -piece wheels are composed of two parts: front and rear. Therefore, the three -piece wheels are composed of three parts: front sheet, rear film, and wheels.
There are currently two main types of multi -piece forging wheels and wheels: one is a special bolt/nut connection; the other is welding. The case of this article is to use the first bolt -fixed connection method. The bolt used is 24K gold -plated SRR bolts.

Due to the problem of seams, the three -piece wheels must be sealed after assembly to ensure gas tightness.
The chrome -plated polishing wheels make it look very helloflush. In addition, the appearance increases the golf R front bar, OSIR carbon fiber rear wing, and R taillights, except for OEM roof luggage racks.
Besides, what are the advantages and disadvantages of one -piece wheels and multi -piece hubs?
One -piece wheel

Advantages: 1. The weight is lighter than the multi -film hub. If you pursue lightweight selection, it is right;

2. The dynamic balance is better than multiple pieces;

3. Higher reliability and no hidden dangers of air leakage.

Disadvantages: 1. High cost and slightly expensive;

2. The shape is relatively simple, and the personality needs are not easy to meet.

Multi -piece wheel

Advantages: 1. The chakra part can be shared, and the shape is convenient. Just replace the middle disk of different styles;

2. Through different sizes of wheel and width, a variety of wheels can be matched and combined to adapt to personalized needs;

3. Due to the disassembly of the wheel and mid -market, it is convenient to use complex surface treatment processes, and the shape is more changing.

Disadvantages: 1. The weight is heavier than one piece;

2. The dynamic balance is not as good as a type;

3. Considering the sealing nature, the requirements for assembly are high.

• Min.Order Quantity: 4 Piece/Pieces
• Supply Ability: 100000 Piece/Pieces per Month