NNX-D911 Customize forged T6061 Deep Dish Concave Wheels Alloy Rim

NNX-D911 20X8.5 20X10 ET 35 43 P.C.D 5X120 center hole 72.6 1piece forged wheel (custom 16-24inch any date)

Rough Quality Inspection

The quality inspection of the blank is to ensure the smooth processing of the subsequent process, and the qualified mechanical products are finally processed. Wool quality test includes:

(1) Dimensions of appearance: there are wheel lip thickness, wheel lip depth, wheel thickness, wheel width, wheel diameter, wheels depth, inner diameter of the wheels, reverse thickness, reverse wheel width, wheel width, reserved bolt holes sinking sinking holes in the holes The depth and diameter of the hole.

(2) Appearance inspection: The non-processing decorative surface (including windows, tendons, bolt holes, decorative holes, and caps) is uniform. Defects such as bumps, depression, scratches. The part of the surface should be consistent with other parts, and new protrusions or four depression should not be caused. The depth of pit defects such as sticking, insufficient pouring, bumps, corrosion, etc. on the surface of the processing surface ≤10mm. The length of the counterpart is moderate, no external cracks, and loose appearance. The depth of the top rod of the blank should be 0.2 mm lower than the third casting surface, and 2.0 mm higher than the third casting surface. The diameter of the corrosion line caused by the connection between the pouring mouth and the bottom mold is small, and the diameter of the dry towel core is 3.0 mm.

(3) Internal inspection: Use X-rays to interrupt the hand, and detect whether there are internal defects such as slag clamping and pores to ensure the air tightness of the hand broken after processing. Ensure the quality of wool damage and smooth processing.

• Min.Order Quantity: 4 Piece/Pieces
• Supply Ability: 100000 Piece/Pieces per Month